HOME WHY US
SOLUTIONS
Projects
Pricing
Downloads
Contact
VYROX contact phone number 03-82136222
VYROX contact email address
CIDB Malaysia

Fibaro

MENU
HOME
CONTROLLER
SWITCHES
SENSORS
INFRARED
SOCKETS
DOOR LOCK
Fibaro smart home system
THE FIBARO SYSTEM TODAY
Best smart home system is the market today
Currently, the FIBARO system is the best building automation solution available on the market.
It offers a non-invasive installation process, which eliminates the need to run meters of cables. Our miniaturized modules can be installed in any wall switch box, behind a light switch, roller blind switch, etc., and are compatible with every electrical system.
It is the only system available on the market capable of controlling LED lighting or fluorescent lights in electrical systems without a neutral wire (old-type electrical systems).
Fibaro devices do not connect permanently to building's infrastructure. So, if you wish to redecorate your apartment, take down some walls and change the interior design concept. It's not a problem. Just do it. Simply take out any given module from the wall and install it in a new location. Thanks to mesh network, the module will update its location and resume cooperation with remaining system components.
iOS, Android App avaialble!
Compatibility and the Z-Wave technology
Fibaro offers full freedom of control and communication, as it is compatible with majority of mobile phones available on the market. Fibaro is compatible with wireless products from nearly 300 independent manufacturers and with all other devices, which may be controlled using systems manufactured by our competitors. It is compatible with all IP cameras available on the market - upon detecting an incident, the system will send a picture or a video to your mobile phone.
ZWave wireless signal smart home system
The Intelligent System
Fibaro System checks and monitors status of individual devices and, if necessary, informs you of an incident. It is the only system on the market which knows an exact position of a pulled-up roller blind or an awning, etc. It updates automatically. It automatically creates backup copies of saved settings and sends them to external servers. Battery-powered components will inform you well in advance of the need to change energy source. If you go on holiday and forget to turn the heating off, Fibaro will send you a message asking if it should do it for you.
Intelligent System
The Graphic Interface
It is the only system with a simple configuration interface allowing you to change dependencies between devices, scenes and the entire system intelligence from any computer at any time, without any specialist software or the need to call technical service.
Smart home for security
Security
Fibaro System can be integrated with an existing alarm system. Each system component may operate independently of the central unit. If the central unit is damaged and the system detects e.g. a fire, each component will decide independently whether to pull up roller blinds, open the windows, doors, activate smoke venting system, etc. You don't need a VPN connection or a static IP address to remotely control the system.
THE FIBARO SYSTEM TOMORROW
Multimedia entertainment system enjoy the movies and musics
Fibaro Multimedia will let you:
1) Control the system from every TV with a HDMI connection.
You are having a quiet evening at home watching a movie, when there is a knock on the door. The movie is paused, lights go on with 30% brightness in the living room and 100% brightness in front of the house. The picture from camera in front of the house appears on your TV screen. You pick up the phone, on which you can see a picture close-up, you have a short conversation and then you open the gate with just one click
2) Watch videos and managing your private video library.
You can access your favorite videos from wherever your TV is.
3) Listen to your favorite music in any room, thanks to non-invasive audio multi-room.
Imagine... you enter the living room and your favorite music starts playing. You walk into the kitchen, sensor detects your presence and kitchen radio starts playing the same music. But there's more... In the event of fire, all audio devices will play specific message to warn your family.
Fibaro Services
With Fibaro you can access a large database of service providers, allowing you to immediately respond to any failure in the house. For instance, in case of washing machine leak, the system will automatically provide you with list of plumbers in your neighborhood, along with their contact details, letting you call one of them immediately.
Shopping with Fibaro
The system will be integrated with the largest online stores. When you shop regularly, you waste a lot of time standing in lines at the check-outs. Spend this time with your family instead - Fibaro will do the shopping, pay for it and inform you of the delivery, as soon as the courier arrives.
Fibaro's unique values
With the Fibaro System, you can define scenes and configure dependencies between particular devices by yourself, according to specific incidents, without the need to call any specialist. You will do it in no time, and if you do not like the outcome or simply change your mind, you can reconfigure the system at home or at work within seconds.
Fibaro Z-Wave Master Controller (Home Center 2)
Fibaro System checks and monitors status of individual devices and, if necessary, informs you of an incident. It is the only system on the market which knows an exact position of a pulled-up roller blind or an awning, etc. It updates automatically. It automatically creates backup copies of saved settings and sends them to external servers. Battery-powered components will inform you well in advance of the need to change energy source. If you go on holiday and forget to turn the heating off, Fibaro will send you a message asking if it should do it for you.
Fibaro Z-Wave Master Controller (Home Center Lite)
Fibaro System checks and monitors status of individual devices and, if necessary, informs you of an incident. It is the only system on the market which knows an exact position of a pulled-up roller blind or an awning, etc. It updates automatically. It automatically creates backup copies of saved settings and sends them to external servers. Battery-powered components will inform you well in advance of the need to change energy source. If you go on holiday and forget to turn the heating off, Fibaro will send you a message asking if it should do it for you.
Z-Wave 1-Gang Dimmer Switch (White)
  • Power: 230 VAC, 50 Hz
  • Signal (Frequency): 868.42 MHz
  • Maximum Load - Resistive: 300 watts maximum, 230 VAC
  • Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module

Z-Wave 1-Gang ON/OFF Switch (Gold)
  • Power: 230 VAC, 50 Hz
  • Signal (Frequency): 868.42 MHz
  • Maximum Load - Resistive: 1380 watts maximum, 230 VAC
  • Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module
Z-Wave 1-Gang ON/OFF Switch (Silver)
  • Power: 230 VAC, 50 Hz
  • Signal (Frequency): 868.42 MHz
  • Maximum Load - Resistive: 1380 watts maximum, 230 VAC
  • Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module
Z-Wave 1-Gang ON/OFF Switch (White)
  • Power: 230 VAC, 50 Hz
  • Signal (Frequency): 868.42 MHz
  • Maximum Load - Resistive: 1380 watts maximum, 230 VAC
  • Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module
Z-Wave 2-Gang Dimmer Switch (White)
  • Power: 230 VAC, 50 Hz
  • Signal (Frequency): 868.42 MHz
  • Maximum Load: 300W,for incandescent lamps only
  • Range: Up to 30meters line of sight between the wireless controller and / or the closest z-wave receiver module

Z-Wave 2-Gang ON/OFF Switch (Gold)
  • Power: 230 VAC, 50 Hz
  • Signal (Frequency): 868.42 MHz
  • Maximum Load - Resistive: 6 amps (1380 watts) maximum, 230 VAC
  • Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module
Z-Wave 1-Gang Dimmer Switch (White)
  • Power: 230 VAC, 50 Hz
  • Signal (Frequency): 868.42 MHz
  • Maximum Load - Resistive: 6 amps (1380 watts) maximum, 230 VAC
  • Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module
Z-Wave 2-Gang ON/OFF Switch (Silver)
  • Power: 230 VAC, 50 Hz
  • Signal (Frequency): 868.42 MHz
  • Maximum Load - Resistive: 6 amps (1380 watts) maximum, 230 VAC
  • Range: Up to 30meters line of sight between the wireless controller and / or the closest z-wave receiver module
Z-Wave 2-Gang ON/OFF Switch (White)
  • Power: 230 VAC, 50 Hz
  • Signal (Frequency): 868.42 MHz
  • Maximum Load - Resistive: 6 amps (1380 watts) maximum, 230 VAC
  • Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module
Z-Wave 3 In 1 Sensor (Temperature + Brightness + Doors/Windows
Magnetic)
  • Adopt newest Z-wave 400series chip, support multichannel operation and higher data rate (9.6/40/100kbps)
  • Higher output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range
  • 1500mA CR123A Lithium battery to guarantee 3.5 year battery life
  • Built in illumination sensor while applied to light control
  • Adopt Z-Wave protocol to secure the success of wireless two way communication
  • With Tamper proof protection
  • Low battery indication
  • Z-Wave V6.02
  • Z-Wave Certificated No. ZC08-13050003
  • Auto report the open/close status and battery status
  • LVD: EN60950-1:2006+A11:2009
  • FCC part15.249 / EN300 220-1/ certification
Z-Wave 3 In 1 Sensor (Temperature +
Brightness +
Motion)
  • Adopt newest Z-wave 400series chip, support multichannel operation and higher data rate (9.6/40/100kbps)
  • Super mini design and good PIR detect range
  • Higher output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range
  • Built in illumination sensor while applied to light control
  • Adopt Z-Wave protocol to secure the success of wireless two way communication
  • With Tamper proof protection
  • Easy install
  • Low battery indication
  • Z-Wave V6.02
  • Z-Wave Certificated No. ZC08-13050003
  • Auto report the open/close status and battery status
  • LVD: EN60950-1:2006+A11:2009
  • FCC part15.249 / EN300 220-1/ certification
Z-Wave 4 In 1 Sensor (Temperature + Brightness + Motion + Doors/Windows Magnetic)
  • (1) Temperature + (2) Brightness + (3) Motion + (4) Doors/Windows, total four functions in one sensor
  • Adopt newest Z-wave 400 series chip, support multichannel operation and higher data rate (9.6/40/100kbps)
  • Higher output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range
  • Built in light sensor while applied to light control
  • Adopt Z-Wave protocol to secure the success of wireless two way communication
  • With Tamper proof protection
  • Easy install
  • Low battery indication
  • Z-Wave V6.02
  • Z-Wave Certificated No. ZC08-13050018(eu)/zc08-13050019(us)
  • Auto report the open/close status and battery status
  • NCC
Z-Wave IR Infrared Emitter
This is a Z-Wave to IR Emitter Device and it works with any Z-Wave compliant gateway or portable controller by translating Z-Wave's Thermostat commands to AC IR control code. User can set the IR code from the built-in code library of ZXT-120 through the configuration commands, or use the learning function through the UI on gateway. This is also builtin a temperature sensor that allow to report your room temperature to home gateway. It can be utilized to control or monitor your room temperature by your smart phone or PC while you are at office, home anywhere or around the world.
Built-in IR code library
The built-in IR code library enables the to work with any ZWave compliant gateway and controller. Gateway and controller will not need to have any knowledge related to IR control code. It also eliminates the needs of complicated set up procedures and proprietary Z-Wave commands to configure the system. The IR code library supports various brand name air conditioners found in the today's market. User can use his controller or gateway to send a 3 digits AC IR code number (include the brand selection) using standard Z-Wave configuration command.
2N® HELIOS IP AUDIO KIT
The 2N® Helios IP Audio Kit is an OEM intercom for manufacturers of various devices, such as parking systems, information boards, industrial equipment or ATMs. Once installed in your system, it will enable you to enjoy not only audio communication, remote monitoring and control, but it will also handle your connection with the user. This gives you an advantage over the competition and provides your customers with the comfort of a live operator and the option of seeking advice by merely pushing a button.

CUSTOMER REFERENCES
Our existing technology had become extremely outdated, and we needed reliable IP equipment for our parking systems from someone who had experience with a similar solution. 2N offered us the 2N® Helios IP Audio Kit solution, which mens our requirements, and we were pleasantly surprised by the quality and software of this simplified VoIP solution
OVERVIEW
Sophisticated software functions enable the 2N® Helios IP Audio Kit to be set up so that it not only enhances your device's features, but also, in conjunction with your device, provides the customer with high user value. Communication takes place through a SIP 2.0 protocol, which is standard for VoIP telephony. In addition, with SIP intercoms you can also take advantage of cheap internet calls or connection via an IP PBX. Like other products in the 2N® Helios IP range, the Audio Kit is compatible with global manufacturers' PBX.

The compact module has a range of interfaces that enable easy connection of buttons, a keypad, signal LEDs, a microphone and speaker, as well as earphones. There are also universal input and output sockets to, for example, control lights or an entrance gate.
Z-Wave Smart Door Lock (Gold)
Smart door lock specially design for Z-Wave wireless smart home system. Integrated with most advanced technologies.
Variety of Unlocking Methods
  • Apps
  • Fingerprints
  • Cards
  • Passwords
  • Keys
  • Remote
Dimensions
Z-Wave Dimmer
Wall Plug
  • Electrical Power : 230 VAC, 50
  • Signal (Frequency) : 868.42 MHz
  • Maximum Load : 300W, for incandescent lamps only
  • Range : Up to 30 meters line of sight between the
Z-Wave ON/OFF Wall Plug (Power Metering)
  • Frequency: 868.42/ 908.42Mhz/921.42MHz
  • Voltage: 230V/50Hz
  • Resistive load 3000W, 1500W for incandescent load or 320W for fluorescent load
  • Overload protection
Z-Wave ON/OFF
Wall Plug
  • Operating Voltage: 230V / 50Hz
  • Maximum Load: 2990 W for Malaysia
  • Range: Minimum 30m line of sight
  • Frequency Range: 868.42MHz

We have customers from all over the world!

Malaysia
Malaysia
Singapore
Singapore
Hong Kong
Hong Kong
US
US
UK
UK
Japan
Japan
Japan
South Africa
India
India
UAE
UAE
Qatar
Qatar
Iran
Iran
Iraq
Iraq
Uzbekistan
Uzbekistan
Jordan
Jordan
Denmark
Denmark
Bulgaria
Bulgaria
Panama
Panama
Nigeria
Nigeria
Morocco
Morocco
Egypt
Egypt
Australia
Australia

Quick Email

Copyright © 2016 VYROX International Sdn Bhd (1023799-A). All rights reserved.